OWAY FT6 Portable Finger Touch Interactive Whiteboard
Introduction
After years of innovative research and development, FT6 has become the main product of the new series of OWAY Group Limited. It is not only more stable but also easier to install and use. Currently, it uses the world's most advanced laser imaging technology. The level of automation and stability are far ahead of other products.
Feature:
Support 100-point finger touch at the same time;150inch screen
Light weight (The main parts include laser emitter and signal receiver, with a total weight of no more than 500 grams)
Auto-calibration, complete within 5 seconds, the success rate of more than 98%.
Competitive price
The shortest throw ratioh 1.28, you can freely adjust the required screen size, very flexible.
| FT6 |
| Calibration |
automatic(5 seconds) / manual (4/15 points) |
| Multi-touch |
100 points touch,writing and erasing can be performed simultaneously |
| Latency |
<6 ms |
| Filter |
software auto-control,enhance stability |
| Min Active Size |
30 inches |
| Max Active Size |
pen touch:220inches,finger touch:150inches,throwball game:400inches(no sunshine room) |
| Technology |
laser image calibration technology |
| Positional Accuracy |
±1 pixel (resolution: 4096*4096) |
| Aspect Ratio |
4:3/16:9/16:10 |
| Projector Ratio |
ultra short throw:0.28/0.16 |
installation distance:about 0.4 - 1m |
| short throw(middle throw):0.83 /0.57/0.38 |
installation distance:about 1 - 3m |
| long throw:1.28 |
installation distance:about 3 - 5m |
| Power |
5 w |
| Power of Laser Emitter |
280mw*2 |
| Laser Emitter Power Requirements |
3.3v/2a |
| Infrared Coverage Area |
6*8 m |
| Signal Refresh Rate |
60/180fps |
| Connect |
the sensor and computer are connected by USB cable,laser emitter just need power |
| Laser Emitter Weight |
146 g |
| Sensor Weight |
135 g |
| OS Requirement |
windows xp,windows 7,windows 8,windows10,windows11 |
| Software |
OwayIWB,Multi-Board |
| Certification |
CE,FCC,RoHS |
| Warranty |
sensor(3 years),laser emitter(1 year),IR pen(1 year) |
| Package |
1.sensor,2.emitter,3.IR pen,4.USB cable(10m),5.remote,6.power adaptor,7.CD with software |
Installation:
FT6 is small and easy to install. It doesn't require professional technology to install.
Just install the laser emitter in the middle area above the whiteboard (or flat surface) and put the signal receiver on the projector.
){kind=link}