Christmas gift Optical Interactive Whiteboard Smart Board interactive for Kindergarten
FT6 Product Description
Finger Touch FT6 includes the emitter and interactive sensor. Emitter can be installed on a flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the interactive sensor. Computer will figure out the position of the mouse by accurate calculating the reflected light position.
Real Multi points (100 points )
High stability 150inch active screen
Support auto-calibration / Manual Calibration
Easy to install
Function and features introduction
- High stability: Use the advanced algorithm to avoid the affect of the light.
- Requirement for the board: The only requirement for the board or wall is flat and evenness. The board can be with the frame. The projection screen can closer to the frame, even in the edges of the frame, the finger touch product can work well.
- Support plenty of gesture recognition: write with single finger; move with two fingers; eraser with palm; two fingers for zoom in& zoom out; two fingers work as scroll bar and so on.
- auto calibration. Infrared technology and Optical technology only support manual calibration. Our auto calibration is much more accuracy and easier to operate.
- Support 10 points finger touch (10 people can write together)
- Support Larger active size: support 40-100" for the room with sunlight (if the room without sunlight, it can support the active size of 40-120".
- Portable, high integration and easy to install: Total weight is only around 500g. The installation is very easy, just need to put the emitter part on the upper of projection Screen, and the sensor mounted to projector or ceiling, No skill needed.
- Sensor with the flash chips: don't need to calibration if you change the computer with the same resolution ratio. It save time, and make the use easier.
- The product is smaller. Emitter part size is 3.5cm x 17cm x 2.4cm; it can put on the board directly.
- remote control: remote control the emitter on/off.
- Sensor's filter with Auto push-pull device: When do auto calibration, the filter will be open; after calibration, the filter will be closed automatically. Such action makes the product more stable to defense the interference light, and the auto calibration success easier.
- Turn common board or wall to touch board. It can turn any flat surface (whiteboard, wall and so on) into finger touchable.
- Any non-transparent object can be used as pen, like a rolled paper. In any active area, any non-transparent object can work instead of the pen and the mouse.
Specifications
| Finger Touch Portable Interactive Whiteboard - FT6 |
| Calibration |
Automatic / Manual (4/15 points) |
| Multi-touch |
Ten points touch |
| Latency |
<20ms |
| Filter |
Software auto-control, enhance stability. |
| Minimum Active Size |
40 inch |
| Max Active Size |
120inch( no sunshine room);100inch( sunshine room) |
| Technology |
Laser Image Calibration Technology |
| Positional Accuracy |
±1 Pixel (Resolution: 4096*4096) |
| Aspect Ratio |
4:3;16:9;16:10 |
| Projector ratio |
Long throw:3.0, installation distance:2.15~3.2M. |
| Laser Beam |
Short throw/ Long throw: 3units; Ultra short throw: 3units. |
| Laser safety |
CLASS I (safety laser) |
| Wave of the laser |
808nm |
| Power |
5w |
| Power of Laser Beam |
150mW/unit *3 |
| Power requirements |
5V/1.5A |
| Signal refresh rate |
Real 60fps. |
| Connect |
The sensor and computer are connected by USB Cable; Emitter and
Sensor are wireless; Emitter just need power. |
| Weight |
0.5kg |
| OS Requirement |
Windows XP, Vista, Windows 7, Windows 8, Windows10 |
| Software |
OwaySIWB |
| Certification |
CE, FCC |
| Warranty |
2-year |
| Package |
1. Sensor 2.Emitter 3.Remote 4.USB cable (10m) 5.Pionter 6.Power Adaptor 7. Manual
|
Packing & Delivery
Packaging Details:Single box + carton or customer specified box
Delivery Time:3 working days
FAQ
Why the software can't save setting and calibration?
•Windows 7 64bit & Vista 64bit :
Close the UAC or Right click SmartIWB and select "Run as Administrator"
•Windows 8:
Right click SmartIWB and select "Run as Administrator"
Oway Group Limited located in Dongguan city, China. Experienced in global interactive education innovation market, Oway Group Limited is envisioned to create and offer to customers our unique IT innovation Technology. Our mission is to enable schools and offices to enjoy better interactive education and presentations through the introduction and application of our interactive whiteboards, interactive module and interactive pens. Specially designed and developed to enhance every aspect of the e-learning, our interactive products provide volatile and hassle-free solutions for education, business and offices.
------------------------------------------------------------------------------------------------------------------------------------------------------
Any more information you want to know or any other pictures you to to see, pls feel free to contact us.
Or send us a online message/ inquiry , We will reply you shortly
Miss Emma
Contact: +86-17096731011
Oway Group Limited
Welcome to visit our company website : owaysmartboard.en.made-in-china.com
Demo video: https://owaysmartboard.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}